GLASS BEAD #9 - 5-Cups - FINE BEAD - Sand Blast Cabinet BLASTING MEDIA

Description

Fine Blasting Media
SMALL PACK
GLASS BEAD
Mil Spec #9
5-Cup Box
(Approx. 3.9 lbs.
- GLASS CUPS in PHOTO FOR DISPLAY PURPOSES ONLY)
High quality mil spec
GLASS BEAD
made in the U.S.A.
5.5 on the Mohs hardness scale.
Quality
GLASS BEAD
is an excellent media to provide
smooth bright, contamination-free finishes.
The hard round glass bead particles close up
surface roughness and porosity by peening.
This helps prevent corrosion, resists rust, staining, and fingerprints,
and provides a bright, tight, new surface.
Peening of most any surface (other than light sheet metal)
can help its appearance and longevity,
whether it is to be painted, plated, powder-coated, or left plain.
Peening also helps to combat stress-risers that can produce cracks,
and increase fatigue resistance to critical parts,
retarding fatigue and fatigue corrosion.
Very fine
GLASS BEAD
, such as this size #9,
will peen and polish to a fine satin finish,
leaving a nearly undetectable profile.
It gives 1,000's more hits per second than a larger bead size,
such as a #7, thus a finer finish.
Being chemically inert and non-toxic,
GLASS BEAD
will not leave any undesirable or ferrous residue on blasted surfaces.
Uncontaminated spent media is environmentally harmless.
We recommend using
GLASS ABRASIVE
(as fine as practical)
to pre-blast most metal parts,
by cleaning thoroughly to a white metal condition,
and then blasting with
GLASS BEAD
for the best results.
Finer, more intricate parts or areas of parts
that have very sharp inside corners, threads, holes, etc,
should be peened with a size bead
that will adequately match the finest radii (rounded corners).
This is especially important if peening to spec.
NOTE: Be aware that many media sellers
offer a GLASS
ABRASIVE
product and call it
GLASS
BEAD
at higher glass bead prices.
Quality
GLASS
BEAD
is round, should be consistent in size, low in fines,
and is best considered for peening and final finishing to produce bright, tight surfaces.
GLASS
ABRASIVE
is angular and cuts fast.
Some Uses of #9 GLASS BEAD:
Particularly useful for peening of finer materials.
Leaves a fine satin finish / slightly bright.
If using Glass Bead to clean, finer bead sizes, such as this GB-9, are useful when used at low pressures.
Fine decorative reflective spheres for hobby use.
Generally used for finer Glass Bead applications.
________________________________________
We also provide a
MEDIA BLEND
of this
#9
GLASS BEAD
with a fine grit
GLASS ABRASIVE
that will remove corrosion, rust, and light paint,
and will also peen to a good final finish.
This
MEDIA BLEND
will give a great final finish
on non-ferrous parts that are not being prepped for paint.
It will also leave an excellent fine profile for paint adhesion.
Remember : Quality mil spec
GLASS BEAD
is round, not angular.
By itself it peens and polishes very well and will also clean looser adhering dirt, etc.,
but with a sharp media blended with it,
as with our
MEDIA BLENDS
,
you can also get a white metal finish
AND
peen (not to spec) at the same time.
This
MEDIA BLEND
will not clean as fast or leave as good a finish
as the two medias used separately,
but will do far better than either media used to the exclusion of the other,
to attain the benefits listed above.
If you would like to buy this
MEDIA BLEND
indicate in the "Message to Seller" section of your PayPal transaction
that you'd prefer the
MEDIA BLEND
#1009
.
________________________________________
The 1st listing photo is representative of our Glass Bead product
and may not be the actual bead size of this listing.
Photos 2 & 3 are specifically of Glass Bead #9.
This listing is for:
SMALL PACK
Fine Blasting Media
GLASS BEAD #9
-- or --
GLASS ABRASIVE / GLASS BEAD
MEDIA BLEND #1009
(By Request)
$
6.70
for
5
cups
The 5-Cup quantity is adequate to charge a blast cabinet for usage
if your blasting system is working properly.
If yours isn't...contact us. We can help!
Also see our eBay Store for:
WHITE STAR
MEDIA BLENDS
ALUMINUM OXIDE
GARNET BLASTING MEDIA
GLASS ABRASIVE BLASTING MEDIA
GLASS BEAD BLASTING MEDIA
BLASTING SYSTEM COMPONENTS
BLAST CABINET UPGRADE KITS
SHIPPING PRICE is valid for
all of the United States of America,
APO/FPO destinations,
as well as Guam, Puerto Rico, and the U.S. Virgin Islands.
We appreciate your business and endeavor to do everything possible
to supply quality products and the very best media at competitive prices;
continuing to offer free and unlimited tech support.
We stand by our products.
Your 100% satisfaction is our aim!
Let us help turn your blasting system into a valuable tool!
Thank you!
Tacoma Company
-
Innovations in Blasting!
Helping Keep America Industrious!
Please don't hesitate to contact us with your questions.